MAXIMUS VENTS

Features

  • Maximus is a well-engineered vent which provides a cost effective venting solution for your tank and IBC’s (Intermediate Bulk Containers).
  • Molded from an engineered Polypropylene Copolymer (PPC) resin which gives the vent excellent chemical and impact resistance.
  • The vent is available with Ethylenepropylene Diene Monomer (EPDM) or Viton gasket materials.
  • The springs are available in Stainless steel 316 or Hastelloy-C.
  • Available in various configurations to offer different pressure and vacuum relief options for custom venting requirements.
  • Color coded for easy identification of gasket and springs used.

THEADED P-VENTS & V-VENTS

Features

  • Installed by simply screwing the Vents into a 2” NPT (National Pipe Thread) opening.
  • Constructed of High Density Polyethylene (HDPE).
  • P-Vents ® : Provide pressure relief
  • V-Vents ® : Provide vacuum venting
  • These vents are available with Ethylene Propylene Diene Monomer (EPDM) or Viton seals.
  • Springs are available in 316 Stainless steel or Hastelloy-C.

BULKHEAD STYLE PRESSURE & VACUUM VENTS

Features

  • Installed exactly the same way as a Bulkhead Fitting would be installed.
  • Constructed of high strength and corrosion resistant black glass filled Polypropylene (PP).
  • Vacuum venting or pressure relief option.
  • These vents are available with Ethylene Propylene Diene Monomer (EPDM) or Viton seals.
  • The springs are available in 316 Stainless steel or Hastelloy-C.

COMBIVENTS

Features

  • Installed by simply screwing the Vents into a 2” NPT (National Pipe Thread) opening.
  • Constructed of High Density Polyethylene (HDPE).
  • P-Vents ® : Provide pressure relief
  • V-Vents ® : Provide vacuum venting
  • These vents are available with Ethylene Propylene Diene Monomer (EPDM) or Viton seals.
  • Springs are available in 316 Stainless steel or Hastelloy-C.

MUSHROOM VENTS

Features

AIK’s Mushroom vent is made from Polypropylene Copolymer (PPC) which offers great strength and impact resistance for in the field durability. This vent is designed for easy installation and allows for free flowing ventilation on tanks or any containers where air make up may be critical when either filling or discharging a tank. Installation hole size is 1-5/16̋ (33mm).

THREADED VENT CAPS

Features

AIK’s threaded one piece vent cap is molded out of a Polypropylene Copolymer (PPC) for excellent impact resistance. The Vent is a one piece construction with the vent mesh molded in place keeping outside elements such as debris and insects. The venting area has been designed for maximum venting efficiency to compensate for negative or positive pressure built up in a tank. Male threads are standard NPT to install into any female NPT threaded fitting, Lid or Screw Cap.
  • Designed for optimum venting capacity.
  • Keeps outside elements out of your tank (insects, debris, etc.).
  • Different designs available for specific applications:
    • All four sides meshed
    • Two sides meshed and two sides closed
    • Two sides meshed and two sides open to act as an anti-Vortex drain
  • Key way flats for easy installation.
  • Mesh is moulded right into the vent body which offers a clean and one piece solution.
  • Moulded from a Polypropylene Copolymer (PPC) for good impact resistance.
  • Male threads are NPT

Request a Quote

1 + 8 =